Water jet cutting in Abu Dhabi
Extraordinary precision is guaranteed by the state-of-the-art Water Jet Cutting Machine in Abu Dhabi. The machine is operated by professionally trained technicians, dedicated to achieving the most accurate profile cutting of even the most intricate drawing. The machine is calibrated to allow Al Eiman team to accommodate different materials up to 3 m x 2 m in sheet size of variable thickness, kindly view the table below: All the materials can be cut with the extreme precision 0.05 mm tolerance without causing disturbance to the original properties of the materials. If you look for the best waterjet cutting near me, you will find us ranked at the top. Without any delay connect with us if you are in search of the number one service provider of waterjet cutting near me.
- Metal Material Titanium Marble Granite Glass (un-tampered) Rubber
- Max. Thickness 300 mm 120 mm 120 mm 150 mm 200 mm
Advantages over conventional cutting procedures
- Highest cutting accuracy
- No thermal stress
- Cutting of non metal materials possible
- Environmentally conscious process
- Clean cutting process without oil & gas
Who Can Benefits
- Machine Shops
- Sign Companies
- Fabrication Companies
- Defense Companies
- Glass Fabrications
- Flooring Contractors
- Artistic Designers
- Stone & Tile Fabrications
CNC in Abu Dhabi
Water Jet cutting Division has been set up in the premises with the installation of a state-of-the-art CNC water jet cutting machines from M/s Water Jet cutting Germany, to serve the needs of the local market. The unit is managed by experienced engineers and technicians. We offer CNC cutting services for almost all materials in any 2 – dimensional shape and profile. Machine bed size is 3 Mtr x 2 Mtr, and Cnc Cutting. Search for the finest CNC cutting services near me and we can confidently say that you will find us ranked high in the list. Contact us if you are looking for the leading CNC cutting services near me today!
Technology
The machine uses high pressure water to cut softer materials like rubber and the abrasive jet adds abrasives to water to cut harder materials like steel, glass and titanium. The high pressure water is forced through a tiny orifice to concentrate high energy in a tiny area, thus enabling highly précised cutting with a CNC in Abu Dhabi smooth finish.
- Advantages over conventional cutting
- Cold cutting process
- No thermal stress
- Can cut any odd shaped profile as per the AutoCAD drawing
- Can cut special materials, plastic coated metals, fiber reinforced material etc.
- High cutting accuracy at a reasonable cost
- Environment friendly
Clients
The company has clients from various fields including
- Oilfield services
- Ship repairs
- Metal fabricators
- Marble / Tile companies
- Engineering contractors
- Furniture manufacturers
- Architecture and Interior designers
- Sign makers
- Auto Mobile Industry etc.
The following chart gives the maximum thickness for different materials that can be cut in our water jet cutting machine.
| MATERIAL | MAXIMUM THICKNESS |
ALUMINIUM | 120MM |
BRASS | 120MM |
COPPER | 120MM |
MARBLE | 120MM |
STEEL | 120MM |
STAINLESS STEEL | 120MM |
TILES | 120MM |
TITANIUM | 120MM |
GLASS | 120MM |
FAQ
Small hole cutting is another skill that waterjets are proficient at. The minimal hole diameter in metal sheet thicknesses (3/16″ thick or less) is approximately 0.060″. A decent general rule of thumb is a minimum hole diameter of 20% of the material thickness for thicker plates.
Hard materials can be sliced using a waterjet cutter at a depth of 25–30 cm (10–12 inches). Although thicker materials can be sliced, doing so slows down the process. The amount of material you can cut with a water jet cutter is unlimited if you have a lot of free time.
Factors affecting the quality of water jets cutting process are:
- Nozzle diameter
- Standoff distance
- Traverse velocity
- Pump jet pressure
On steel or metal, plasma cutting machines may cut at up to 200 ipm (inches per minute). Plasma cutting is faster than water jet cutting, which is slower. Water jets can only cut at a speed of no more than 15 inches per minute. One of the primary differences is the faster cutting rates of plasma cutters. The waterjet cutting near me gives you the ideal waterjet cutter.